Loading the catalog…
XCP-HP CU (3 CONDUCTORS) 2000A (Starline)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Voltage V | 1000 |
|---|---|
| Frequency Hz | 50 |
| Current Rating A | 2000 |
| Rated Insulation Voltage V | 1000 |
| Ip Rating | 55/65* |
| System Config | XCP-HP CU (3 Conductors) |
| Number Of Conductors | 4 |
| Phases | 3 |
| Fire Load | |
| Product Name | |
| Short Circuit Rating Ka |
| SKU | XCP-HP CU (3 CONDUCTORS) 2000A |
|---|
| System (conductors) | |
|---|---|
| Bar configuration | |
| Overall dimension of the busbars |
| Peak current |
|---|
| Allowable specific energy for three-phase fault |
|---|
| Rated short-time current of the protective circuit (1 s) |
|---|
| Peak current of the protective circuit |
|---|
| Phase resistance at 20°C |
|---|
| Phase reactance (50hz) |
|---|
| Phase impedance |
|---|
| Phase resistance at thermal conditions |
|---|
| Phase impedance at thermal conditions |
|---|
| Resistance of the protective bar (PE 1) |
|---|
| Resistance of the protective bar (PE 2) |
|---|
| Resistance of the protective bar (PE 3) |
|---|
| Reactance of the protective bar |
|---|
| Resistance of the fault loop (PE 1) |
|---|
| Resistance of the fault loop (PE 2) |
|---|
| Resistance of the fault loop (PE 3) |
|---|
| Reactance of the fault loop (50hz) |
|---|
| Impedance of the fault loop (PE 1) |
|---|
| Impedance of the fault loop (PE 2) |
|---|
| Impedance of the fault loop (PE 3) |
|---|
| Zero-sequence short-circuit average resistance phase - PE |
|---|
| Zero-sequence short-circuit average reactance phase - PE |
|---|
| Zero-sequence short-circuit average impedance phase - PE |
|---|
| Voltage drop with distribuited load cosϕ = 0,70 |
|---|
| Voltage drop with distribuited load cosϕ = 0,75 |
|---|
| Voltage drop with distribuited load cosϕ = 0,80 |
|---|
| Voltage drop with distribuited load cosϕ = 0,85 |
|---|
| Voltage drop with distribuited load cosϕ = 0,90 |
|---|
| Voltage drop with distribuited load cosϕ = 0,95 |
|---|
| Voltage drop with distribuited load cosϕ = 1,00 |
|---|
| Weight (PE 1) |
|---|
| Weight (PE 2) |
|---|
| Weight (PE 3) |
|---|
| Insulation material thermal resistance class |
|---|
| Losses for the Joule effect at nominal current |
|---|
| Ambient temperature min/MAX (daily average)** |
|---|
| Footnote |
|---|
