Loading the catalog…
MA09ACA20T AM/EM (Toshiba)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Interface | SATA |
|---|---|
| Interface Speed | 6.0 Gbit/s, 3.0 Gbit/s, 1.5 Gbit/s |
| Capacity Tb | 20 |
| Rotational Speed Rpm | 7200 |
| Cache Mb | 512 |
| Media Type | hdd |
| Mtbf Hours | 2,500,000 |
| Annualized Failure Rate Pct | |
| Dimensions Height Mm | |
| Minimum Emergency Unloads | |
| Non Operating Vibration | |
| Normal Load Unload Cycles | |
| Operating Vibration | |
| Product Name |
| SKU | MA09ACA20T AM/EM |
|---|
| Sector size (fixed length) | |
|---|---|
| Number of sectors (4096 B / sectors) | |
| Number of sectors (512 B / sectors) | |
| Zone Layout | |
| Maximum sustained data rate (Typ.) | |
| Start time (Typ.) | |
| Start time (Max.) | |
| Stop time (Max.) | |
| External dimensions - Height (Max.) | |
| External dimensions - Width (Max.) | |
| External dimensions - Length (Max.) | |
| Weight (Max.) | |
| Weight (Typ.) | |
| Acoustics (Sound Power) - Idle (Typ.) | |
| Acoustics (Sound Power) - Active (Typ.) | |
| Operating ambient temperature | |
| Operating enclosure surface temperature | |
| Operating temperature gradient | |
| Operating relative humidity | |
| Operating humidity gradient | |
| Operating maximum wet bulb temperature | |
| Operating rotational vibration | |
| Operating shock | |
| Operating altitude | |
| Storage ambient temperature | |
| Storage altitude | |
| Storage period | |
| Non-operating ambient temperature | |
| Non-operating altitude | |
| Non-operating temperature gradient | |
| Non-operating relative humidity | |
| Non-operating humidity gradient | |
| Non-operating maximum wet bulb temperature | |
| Non-operating shock | |
| Non-operating rotational shock | |
| Power requirement regulation | |
| Power requirement rise time | |
| Power requirement ripple (peak-to-peak) | |
| Spin up peak current DC +5 V | |
| Spin up peak current DC +12 V | |
| Spin up maximum DC current DC +5 V | |
| Spin up maximum DC current DC +12 V | |
| Random Read 4KB Q1 peak current DC +5 V | |
| Random Read 4KB Q1 peak current DC +12 V | |
| Random Read 4KB Q1 average current DC +5 V | |
| Random Read 4KB Q1 average current DC +12 V | |
| Random Read 4KB Q1 average wattage | |
| Random Read 4KB Q16 peak current DC +5 V | |
| Random Read 4KB Q16 peak current DC +12 V | |
| Random Read 4KB Q16 average current DC +5 V | |
| Random Read 4KB Q16 average current DC +12 V | |
| Random Read 4KB Q16 average wattage | |
| Random Write 4KB Q1 peak current DC +5 V | |
| Random Write 4KB Q1 peak current DC +12 V | |
| Random Write 4KB Q1 average current DC +5 V | |
| Random Write 4KB Q1 average current DC +12 V | |
| Random Write 4KB Q1 average wattage | |
| Random Write 4KB Q16 peak current DC +5 V | |
| Random Write 4KB Q16 peak current DC +12 V | |
| Random Write 4KB Q16 average current DC +5 V | |
| Random Write 4KB Q16 average current DC +12 V | |
| Random Write 4KB Q16 average wattage | |
| Sequential Read peak current DC +5 V | |
| Sequential Read peak current DC +12 V | |
| Sequential Read average current DC +5 V | |
| Sequential Read average current DC +12 V | |
| Sequential Read average wattage | |
| Sequential Write peak current DC +5 V | |
| Sequential Write peak current DC +12 V | |
| Sequential Write average current DC +5 V | |
| Sequential Write average current DC +12 V | |
| Sequential Write average wattage | |
| Random Write/Read 4KB Q1 peak current DC +5 V | |
| Random Write/Read 4KB Q1 peak current DC +12 V | |
| Random Write/Read 4KB Q1 average current DC +5 V | |
| Random Write/Read 4KB Q1 average current DC +12 V | |
| Random Write/Read 4KB Q1 average wattage | |
| Random Write/Read 4KB Q16 peak current DC +5 V | |
| Random Write/Read 4KB Q16 peak current DC +12 V | |
| Random Write/Read 4KB Q16 average current DC +5 V | |
| Random Write/Read 4KB Q16 average current DC +12 V | |
| Random Write/Read 4KB Q16 average wattage | |
| Idle_A average current DC +5 V | |
| Idle_A average current DC +12 V | |
| Idle_A average wattage | |
| Idle_B average current DC +5 V | |
| Idle_B average current DC +12 V | |
| Idle_B average wattage | |
| Idle_C average current DC +5 V | |
| Idle_C average current DC +12 V | |
| Idle_C average wattage | |
| Standby average current DC +5 V | |
| Standby average current DC +12 V | |
| Standby average wattage | |
| Power consumption test conditions | |
| Figure 2.1 title | |
| Spin-up current waveform moving average window | |
| Figure 2.1 vertical axis | |
| Figure 2.1 horizontal axis | |
| Figure 2.2 title | |
| Figure 2.2 description | |
| Figure 2.2 vertical axis | |
| Figure 2.2 horizontal axis | |
| Unrecoverable error rate | |
| Positioning error rate | |
| Power-On Hours (POH) | |
| Average HDA surface temperature (reliability basis) | |
| Workloads (reliability basis) | |
| Reliability temperature warning | |
| Storage Period (unopened, unconditioned) | |
| Storage Period (extended, controlled environment) | |
| Storage condition - Temperature | |
| Storage condition - Humidity | |
| Storage condition - Altitude | |
| Storage condition - Condensing | |
| Storage condition - Corrosive | |
| Data security at power failure | |
| Unload commands | |
| Load/unload idle mode commands | |
| Required power-off sequence | |
| SMR type | |
| Conventional Zone size (% of total capacity) | |
| Sequential Write required Zone access | |
| Zone size of Sequential Write preferred Zones | |
| LBA allocation unit | |
| Conventional Zone start LBA | |
| Conventional Zone end LBA | |
| Conventional Zone Size | |
| Sequential Write required Zone start LBA | |
| Sequential Write required Zone end LBA | |
| Sequential Write required Zone Number of zones | |
| Sequential Write required Zone size per zone | |
| Number of amount Sectors | |
| PUIS feature support | |
| PUIS enable/disable cycle limit | |
| Dimensions unit | |
| SATA plug centerline location | |
| Centerline reference | |
| Width (face view) | |
| Mounting hole position (face view) | |
| Mounting hole position (side view) | |
| Length (side view, max) | |
| Bottom mounting hole position | |
| Bottom mounting hole position (max) | |
| Bottom mounting screws | |
| Bottom mounting screw depth (max) | |
| Side mounting screws | |
| Side mounting screw depth (max) | |
| Ambient temperature measurement reference distance | |
| Maximum enclosure surface temperature (air flow requirement) | |
| Enclosure surface temperature for assured MTTF | |
| Assured MTTF | |
| Surface temperature measurement point 1 (HDA surface) maximum temperature | |
| Surface temperature measurement point 2 (PCBA surface) maximum temperature | |
| Surface temperature measurement point 3 (PCBA surface) maximum temperature | |
| Figure 3.5 measurement point location dimension (top view, vertical) | |
| Figure 3.5 measurement point location dimension (top view, horizontal) | |
| Figure 3.5 measurement point location dimension (PCBA view, vertical) | |
| Figure 3.5 measurement point location dimension (PCBA view, horizontal) | |
| Figure unit | |
| Environmental magnetic field installation restriction | |
| Leakage magnetic flux installation restriction | |
| CN1 signal S1 | |
| CN1 signal S2 | |
| CN1 signal S3 | |
| CN1 signal S4 | |
| CN1 signal S5 | |
| CN1 signal S6 | |
| CN1 signal S7 | |
| CN1 power P1 | |
| CN1 power P2 | |
| CN1 power P3 | |
| CN1 power P4 | |
| CN1 power P5 | |
| CN1 power P6 | |
| CN1 power P7 | |
| CN1 power P8 | |
| CN1 power P9 | |
| CN1 power P10 | |
| CN1 power P11 | |
| CN1 power P12 | |
| CN1 power P13 | |
| CN1 power P14 | |
| CN1 power P15 | |
| Power supply usage | |
| Ground bonding | |
| Pin 11 activity VDin tolerated input voltage | |
| Pin 11 activity VDact drive output voltage when driving low | |
| Pin 11 activity VDinact drive output voltage when not driving low | |
| Pin 11 activity IDinact drive leakage current when not driven | |
| Pin 11 host VHin tolerated input voltage | |
| Pin 11 host VHH max voltage presented to drive | |
| Pin 11 host VHL min allowable host voltage | |
| Pin 11 host IHAct host current delivered to drive | |
| Host staggered spin VHENB not-disable voltage | |
| Host staggered spin VHdis disable voltage | |
| Recommended drive side connector | |
| Recommended host side connector (for board, right angle) | |
| Recommended host side connector (for cable) | |
| Recommended cable |
