Loading the catalog…
SPQ-CS-ER-CDFA (Sourcephotonics)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Data Rate Gbps | 100 |
|---|---|
| Interconnect Type | optical_transceiver |
| Fiber Type | SMF |
| Media Reach Class | ER4 |
| Product Name | 100G-ER4 dual rate QSFP28 Transceiver |
| Application | |
| Feature | |
| Laser Type | |
| Product Description |
| Form factor | QSFP28 |
|---|---|
| SKU | SPQ-CS-ER-CDFA |
| Datasheet status | |
|---|---|
| Document number | |
| Document date |
| Storage Temperature (TS) Min. |
|---|
| Storage Temperature (TS) Max. |
|---|
| Supply Voltage (VCC) Min. |
|---|
| Supply Voltage (VCC) Max. |
|---|
| Relative Humidity (non-condensing) (RH) Min. |
|---|
| Relative Humidity (non-condensing) (RH) Max. |
|---|
| Data Input Voltage Differential |VDIP-VDIN| Max. |
|---|
| Control Input Voltage (VI) Min. |
|---|
| Control Input Voltage (VI) Max. |
|---|
| Control Output Current (IO) Min. |
|---|
| Control Output Current (IO) Max. |
|---|
| Operating Case Temperature (TOPR) Min. |
|---|
| Operating Case Temperature (TOPR) Max. |
|---|
| Power Supply Voltage (VCC) Min. |
|---|
| Power Supply Voltage (VCC) Typical |
|---|
| Power Supply Voltage (VCC) Max. |
|---|
| Instantaneous peak current at hot plug (ICC_IP) Max. |
|---|
| Sustained peak current at hot plug (ICC_SP) Max. |
|---|
| Maximum Power Dissipation (PD) Max. |
|---|
| Maximum Power Dissipation, Low Power Mode (PDLP) Max. |
|---|
| Aggregate Bit Rate (ABR) Typical |
|---|
| Data Rate per Lane (DRL) Typical |
|---|
| Control Input Voltage High (VIH) Min. |
|---|
| Control Input Voltage High (VIH) Max. |
|---|
| Control Input Voltage Low (VIL) Min. |
|---|
| Control Input Voltage Low (VIL) Max. |
|---|
| Two Wire Serial Interface Clock Rate Max. |
|---|
| Module power supply noise tolerance 10 Hz - 10 MHz (peak-to-peak) Max. |
|---|
| Rx Differential Data Output Load Typical |
|---|
| Operating Distance Min. |
|---|
| Operating Distance Max. |
|---|
| Operating Distance note |
|---|
| Tx Wavelength L0 (λC0) Min. [100GE] |
|---|
| Tx Wavelength L0 (λC0) Typical [100GE] |
|---|
| Tx Wavelength L0 (λC0) Max. [100GE] |
|---|
| Tx Wavelength L1 (λC1) Min. [100GE] |
|---|
| Tx Wavelength L1 (λC1) Typical [100GE] |
|---|
| Tx Wavelength L1 (λC1) Max. [100GE] |
|---|
| Tx Wavelength L2 (λC2) Min. [100GE] |
|---|
| Tx Wavelength L2 (λC2) Typical [100GE] |
|---|
| Tx Wavelength L2 (λC2) Max. [100GE] |
|---|
| Tx Wavelength L3 (λC3) Min. [100GE] |
|---|
| Tx Wavelength L3 (λC3) Typical [100GE] |
|---|
| Tx Wavelength L3 (λC3) Max. [100GE] |
|---|
| Side-mode suppression ratio (SMSR) Min. [100GE] |
|---|
| Total Average Optical Launch Power (POUT) Max. [100GE] |
|---|
| Average Launch Power Tx_Off (Each Lane) (POUT_OFF) Max. [100GE] |
|---|
| Average Optical Launch Power (Each Lane) (POUTL) Min. [100GE] |
|---|
| Average Optical Launch Power (Each Lane) (POUTL) Max. [100GE] |
|---|
| Extinction Ratio (ER) Min. [100GE] |
|---|
| Optical Modulation Amplitude (Each Lane) (OMA) Min. [100GE] |
|---|
| Optical Modulation Amplitude (Each Lane) (OMA) Max. [100GE] |
|---|
| Transmitter and Dispersion Penalty (Each Lane) (TDP) Max. [100GE] |
|---|
| Difference in launch power between any two lanes (Average and OMA) (DT_OMA) Max. [100GE] |
|---|
| Optical Return Loss Tolerance (ORLT) Max. [100GE] |
|---|
| RIN20OMA (RIN) Max. [100GE] |
|---|
| Transmitter Reflectance (TR) Max. [100GE] |
|---|
| Transmitter Eye Mask Definition [100GE] |
|---|
| Tx Wavelength L0 (λC0) Min. [OTU4] |
|---|
| Tx Wavelength L0 (λC0) Typical [OTU4] |
|---|
| Tx Wavelength L0 (λC0) Max. [OTU4] |
|---|
| Tx Wavelength L1 (λC1) Min. [OTU4] |
|---|
| Tx Wavelength L1 (λC1) Typical [OTU4] |
|---|
| Tx Wavelength L1 (λC1) Max. [OTU4] |
|---|
| Tx Wavelength L2 (λC2) Min. [OTU4] |
|---|
| Tx Wavelength L2 (λC2) Typical [OTU4] |
|---|
| Tx Wavelength L2 (λC2) Max. [OTU4] |
|---|
| Tx Wavelength L3 (λC3) Min. [OTU4] |
|---|
| Tx Wavelength L3 (λC3) Typical [OTU4] |
|---|
| Tx Wavelength L3 (λC3) Max. [OTU4] |
|---|
| Total Average Optical Launch Power (POUT) Max. [OTU4] |
|---|
| Average Optical Launch Power (Each Lane) (POUTL) Min. [OTU4] |
|---|
| Average Optical Launch Power (Each Lane) (POUTL) Max. [OTU4] |
|---|
| Channel power difference Max. [OTU4 Tx] |
|---|
| Extinction Ratio (ER) Min. [OTU4] |
|---|
| Optical Return Loss (ORL) Max. [OTU4 Tx] |
|---|
| Reflectance of optical network element Max. [OTU4 Tx] |
|---|
| Transmitter Eye Mask Definition [OTU4] |
|---|
| Rx Wavelength L0 (λC0) Min. [100GE] |
|---|
| Rx Wavelength L0 (λC0) Typical [100GE] |
|---|
| Rx Wavelength L0 (λC0) Max. [100GE] |
|---|
| Rx Wavelength L1 (λC1) Min. [100GE] |
|---|
| Rx Wavelength L1 (λC1) Typical [100GE] |
|---|
| Rx Wavelength L1 (λC1) Max. [100GE] |
|---|
| Rx Wavelength L2 (λC2) Min. [100GE] |
|---|
| Rx Wavelength L2 (λC2) Typical [100GE] |
|---|
| Rx Wavelength L2 (λC2) Max. [100GE] |
|---|
| Rx Wavelength L3 (λC3) Min. [100GE] |
|---|
| Rx Wavelength L3 (λC3) Typical [100GE] |
|---|
| Rx Wavelength L3 (λC3) Max. [100GE] |
|---|
| Receiver Sensitivity (OMA) per Lane Max. [100GE] |
|---|
| Stressed Receiver Sensitivity in OMA (Each Lane) Max. [100GE] |
|---|
| Stressed Eye J2 Jitter (Each Lane) Typical [100GE] |
|---|
| Stressed Eye J9 Jitter (Each Lane) Typical [100GE] |
|---|
| Vertical Eye Closure Penalty Typical [100GE] |
|---|
| Damage Threshold for Receiver (Pin, damage) Min. [100GE] |
|---|
| Average Receive Power (Each Lane) Typical [100GE] |
|---|
| Average Receive Power (Each Lane) Max. [100GE] |
|---|
| Receive Power in OMA (Each Lane) (OMA) Max. [100GE] |
|---|
| Receiver Reflectance (RXR) Max. [100GE] |
|---|
| Receiver sensitivity test note [100GE] |
|---|
| Rx Wavelength L0 (λC0) Min. [OTU4] |
|---|
| Rx Wavelength L0 (λC0) Typical [OTU4] |
|---|
| Rx Wavelength L0 (λC0) Max. [OTU4] |
|---|
| Rx Wavelength L1 (λC1) Min. [OTU4] |
|---|
| Rx Wavelength L1 (λC1) Typical [OTU4] |
|---|
| Rx Wavelength L1 (λC1) Max. [OTU4] |
|---|
| Rx Wavelength L2 (λC2) Min. [OTU4] |
|---|
| Rx Wavelength L2 (λC2) Typical [OTU4] |
|---|
| Rx Wavelength L2 (λC2) Max. [OTU4] |
|---|
| Rx Wavelength L3 (λC3) Min. [OTU4] |
|---|
| Rx Wavelength L3 (λC3) Typical [OTU4] |
|---|
| Rx Wavelength L3 (λC3) Max. [OTU4] |
|---|
| Mean total input power Max. [OTU4] |
|---|
| Receiver Sensitivity, per Lane Max. [OTU4] |
|---|
| Average Receive Power (Each Lane) Typical [OTU4] |
|---|
| Average Receive Power (Each Lane) Max. [OTU4] |
|---|
| Channel power difference Max. [OTU4 Rx] |
|---|
| Optical path penalty (DP) Max. [OTU4] |
|---|
| Receiver reflectance (ORL) Max. [OTU4] |
|---|
| Receiver sensitivity test note [OTU4] |
|---|
| High-Speed Signal compliance |
|---|
| Low-Speed Signal compliance |
|---|
| Receiver Differential Data Input Amplitude (VIN,P-P) Min. |
|---|
| Receiver Differential Data Input Amplitude (VIN,P-P) Max. |
|---|
| Receiver Differential Termination Mismatch Max. |
|---|
| LPMode, Reset and ModSelL (VIL) Min. |
|---|
| LPMode, Reset and ModSelL (VIL) Max. |
|---|
| LPMode, Reset and ModSelL (VIH) Min. |
|---|
| LPMode, Reset and ModSelL (VIH) Max. |
|---|
| Transmitter Differential Data Output Amplitude (VOUT,P-P) Max. |
|---|
| Transmitter Differential Termination Mismatch Max. |
|---|
| Output Rise/Fall Time, 20%~80% (TR) Min. |
|---|
| ModPrsL and IntL (VOL) Min. |
|---|
| ModPrsL and IntL (VOL) Max. |
|---|
| ModPrsL and IntL (VOH) Min. |
|---|
| ModPrsL and IntL (VOH) Max. |
|---|
| Recommended Host Board Power Supply Filtering |
|---|
| Initialization Time (t_init) Max. |
|---|
| Reset Init Assert Time (t_reset_init) Min. |
|---|
| Serial Bus Hardware Ready Time (t_serial) Max. |
|---|
| Monitor Data Ready Time (t_data) Max. |
|---|
| Reset Assert Time (t_reset) Max. |
|---|
| LPMode Assert Time (ton_LPMode) Max. |
|---|
| LPMode De-assert Time (toff_LPMode) Max. |
|---|
| IntL Assert Time (ton_IntL) Max. |
|---|
| IntL Deassert Time (toff_IntL) Max. |
|---|
| Rx LOS Assert Time (ton_lol) Max. |
|---|
| RxLOSL Assert Time (Optional Fast Mode) (ton_f_LOS) Max. |
|---|
| RxLOSL Deassert Time (Optional Fast Mode) (toff_f_LOS) Max. |
|---|
| Tx Fault Assert Time (ton_Txfault) Max. |
|---|
| Flag Assert Time (ton_flag) Max. |
|---|
| Mask Assert Time (ton_mask) Max. |
|---|
| Mask Deassert Time (toff_mask) Max. |
|---|
| Power_over-ride or Power-set Assert Time (ton_Pdown) Max. |
|---|
| Power_over-ride or Power-set De-assert Time (toff_Pdown) Max. |
|---|
| Rx Squelch Assert Time (ton_Rxsq) Max. |
|---|
| Rx Squelch Deassert Time (toff_Rxsq) Max. |
|---|
| Tx Squelch Assert Time (ton_Txsq) Max. |
|---|
| Tx Squelch Deassert Time (toff_Txsq) Max. |
|---|
| Tx Disable Assert Time (fast mode) (ton_Txdisf) Max. |
|---|
| Tx Disable Deassert Time (fast mode) (toff_Txdisf) Max. |
|---|
| Rx Output Disable Assert Time (ton_Rxdis) Max. |
|---|
| Rx Output Disable Deassert Time (toff_Rxdis) Max. |
|---|
| Squelch Disable Assert Time (ton_sqdis) Max. |
|---|
| Squelch Disable Deassert Time (toff_sqdis) Max. |
|---|
| Digital Diagnostics Temperature Range |
|---|
| Digital Diagnostics Temperature Accuracy |
|---|
| Digital Diagnostics Temperature Calibration |
|---|
| Digital Diagnostics Voltage Range |
|---|
| Digital Diagnostics Voltage Accuracy |
|---|
| Digital Diagnostics Voltage Calibration |
|---|
| Digital Diagnostics Tx Bias Current (Each Lane) Range |
|---|
| Digital Diagnostics Tx Bias Current (Each Lane) Accuracy |
|---|
| Digital Diagnostics Tx Bias Current (Each Lane) Calibration |
|---|
| Digital Diagnostics Tx Output Power (Each Lane) Range |
|---|
| Digital Diagnostics Tx Output Power (Each Lane) Accuracy |
|---|
| Digital Diagnostics Tx Output Power (Each Lane) Calibration |
|---|
| Digital Diagnostics Rx Receive Power (Each Lane) Range |
|---|
| Digital Diagnostics Rx Receive Power (Each Lane) Accuracy |
|---|
| Digital Diagnostics Rx Receive Power (Each Lane) Calibration |
|---|
| Ordering Part No. |
|---|
| Handling Precautions |
|---|
| Laser Safety |
|---|
| Warranty |
|---|
| Manufacturer |
|---|
| US Headquarters |
|---|
| Website |
|---|
