Loading the catalog…
SPQ-CE-ZR-CDFA (Sourcephotonics)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Reach M | 2 |
|---|---|
| Fiber Type | SMF |
| Data Rate Gbps | 100 |
| Interconnect Type | optical_transceiver |
| Media Reach Class | ZR4 |
| Product Name | 100G-ZR4 QSFP28 Transceiver |
| Description | |
| Feature | |
| Los Hysteresis | |
| Pin 1 | |
| Pin 10 | |
| Pin 11 | |
| Pin 12 | |
| Pin 13 | |
| Pin 14 |
| Pin 15 |
|---|
| Pin 16 |
|---|
| Pin 17 |
|---|
| Pin 18 |
|---|
| Pin 19 |
|---|
| Pin 2 |
|---|
| Pin 20 |
|---|
| Pin 3 |
|---|
| Pin 4 |
|---|
| Pin 5 |
|---|
| Pin 6 |
|---|
| Pin 7 |
|---|
| Pin 8 |
|---|
| Pin 9 |
|---|
| Storage Temperature |
|---|
| Supply Voltage |
|---|
| Form factor | QSFP28 |
|---|---|
| SKU | SPQ-CE-ZR-CDFA |
| Manufacturer | |
|---|---|
| Document Number | |
| Document Date | |
| Relative Humidity (non-condensing) | |
| Data Input Voltage Differential | |
| Control Input Voltage | |
| Control Output Current | |
| Operating Case Temperature | |
| Power Supply Voltage | |
| Instantaneous peak current at hot plug | |
| Sustained peak current at hot plug | |
| Maximum Power Dissipation | |
| Maximum Power Dissipation, Low Power Mode | |
| Aggregate Bit Rate | |
| Data Rate per Lane | |
| Control Input Voltage High | |
| Control Input Voltage Low | |
| Two Wire Serial Interface Clock Rate | |
| Module power supply noise tolerance 10 Hz - 10 MHz (peak-to-peak) | |
| Rx Differential Data Output Load | |
| Wavelength L0 | |
| Wavelength L1 | |
| Wavelength L2 | |
| Wavelength L3 | |
| Side-mode suppression ratio | |
| Total Average Optical Launch Power | |
| Average Launch Power Tx_Off (Each Lane) | |
| Average Optical Launch Power (Each Lane) | |
| Extinction Ratio | |
| Spectral Width | |
| Optical Modulation Amplitude (Each Lane) | |
| Transmitter and Dispersion Penalty (Each Lane) | |
| Launch Power in OMA minus TDP (Each Lane) | |
| Difference in launch power between any two lanes (OMA) | |
| Optical Return Loss Tolerance | |
| RIN20OMA | |
| Transmitter Reflectance | |
| Transmitter Eye Mask Definition | |
| Receiver Sensitivity (OMA) per Lane | |
| Stressed Receiver Sensitivity in OMA (Each Lane) | |
| Stressed Eye J2 Jitter (Each Lane) | |
| Stressed Eye J9 Jitter (Each Lane) | |
| Vertical Eye Closure Penalty | |
| Damage Threshold for Receiver | |
| Average Receive Power (Each Lane) | |
| Receive Power in OMA (Each Lane), Overload | |
| Receiver Reflectance | |
| LOS Assert | |
| LOS De-assert | |
| High-Speed Signal | |
| Low-Speed Signal | |
| Differential Data Input Amplitude | |
| Differential Termination Mismatch (Receiver) | |
| LPMode, Reset and ModSelL | |
| Differential Data Output Amplitude | |
| Differential Termination Mismatch (Transmitter) | |
| Output Rise/Fall Time, 20%~80% | |
| ModPrsL and IntL | |
| Pin 21 | |
| Pin 22 | |
| Pin 23 | |
| Pin 24 | |
| Pin 25 | |
| Pin 26 | |
| Pin 27 | |
| Pin 28 | |
| Pin 29 | |
| Pin 30 | |
| Pin 31 | |
| Pin 32 | |
| Pin 33 | |
| Pin 34 | |
| Pin 35 | |
| Pin 36 | |
| Pin 37 | |
| Pin 38 | |
| Pin Note 2 | |
| Recommended Host Board Power Supply Filtering | |
| Initialization Time | |
| Reset Init Assert Time | |
| Serial Bus Hardware Ready Time | |
| Monitor Data Ready Time | |
| Reset Assert Time | |
| LPMode Assert Time | |
| LPMode De-assert Time | |
| IntL Assert Time | |
| IntL Deassert Time | |
| RxLOSL Assert Time (Optional Fast Mode) | |
| RxLOSL Deassert Time (Optional Fast Mode) | |
| Rx LOS Assert Time | |
| Tx Fault Assert Time | |
| Flag Assert Time | |
| Mask Assert Time | |
| Mask Deassert Time | |
| Power_over-ride or Power-set Assert Time | |
| Power_over-ride or Power-set De-assert Time | |
| Rx Squelch Assert Time | |
| Rx Squelch Deassert Time | |
| Tx Squelch Assert Time | |
| Tx Squelch Deassert Time | |
| Tx Disable Assert Time (fast mode) | |
| Tx Disable Deassert Time (fast mode) | |
| Rx Output Disable Assert Time | |
| Rx Output Disable Deassert Time | |
| Squelch Disable Assert Time | |
| Squelch Disable Deassert Time | |
| Digital Diagnostics - Temperature Range | |
| Digital Diagnostics - Temperature Accuracy | |
| Digital Diagnostics - Voltage Range | |
| Digital Diagnostics - Voltage Accuracy | |
| Digital Diagnostics - Tx Bias Current (Each Lane) Range | |
| Digital Diagnostics - Tx Bias Current (Each Lane) Accuracy | |
| Digital Diagnostics - Tx Output Power (Each Lane) Range | |
| Digital Diagnostics - Tx Output Power (Each Lane) Accuracy | |
| Digital Diagnostics - Rx Receive Power (Each Lane) Range | |
| Digital Diagnostics - Rx Receive Power (Each Lane) Accuracy | |
| Ordering - Part No. | |
| Ordering - Application | |
| Ordering - Data Rate | |
| Ordering - Laser Source | |
| Ordering - Fiber Type | |
| Handling Precautions | |
| Laser Safety | |
| Warranty | |
| Specification Status | |
| Copyright | |
| US Headquarters | |
| China Office | |
| Taiwan Office | |
| Website |
