Loading the catalog…
SPQ-CE-LR-CDFN (Sourcephotonics)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Data Rate Gbps | 100 |
|---|---|
| Interconnect Type | optical_transceiver |
| Fiber Type | SMF |
| Optical Connector | duplex-LC |
| Media Reach Class | LR4 |
| Product Name | 100G-LR4 2km QSFP28 Transceiver |
| Product Description | |
| Storage Temperature | |
| Supply Voltage |
| Form factor | QSFP28 |
|---|---|
| SKU | SPQ-CE-LR-CDFN |
| Document Number | |
|---|---|
| Document Date | |
| Feature - QSFP28 Standard Compliance | |
| Feature - IEEE Compliance |
|---|
| Feature - Electrical Interface |
|---|
| Feature - Supply Voltage |
|---|
| Feature - Maximum power consumption |
|---|
| Feature - Case Operating Temperature |
|---|
| Feature - Laser/Receiver |
|---|
| Feature - Package/Connector |
|---|
| Feature - Serial Interface |
|---|
| Feature - RoHS Compliance |
|---|
| Feature - Laser Class |
|---|
| Relative Humidity (non-condensing) |
|---|
| Data Input Voltage – Differential |
|---|
| Control Input Voltage |
|---|
| Control Output Current |
|---|
| Operating Case Temperature |
|---|
| Power Supply Voltage |
|---|
| Instantaneous peak current at hot plug |
|---|
| Sustained peak current at hot plug |
|---|
| Maximum Power Dissipation |
|---|
| Maximum Power Dissipation, Low Power Mode |
|---|
| Aggregate Bit Rate |
|---|
| Data Rate per Lane |
|---|
| Control Input Voltage High |
|---|
| Control Input Voltage Low |
|---|
| Two Wire Serial Interface Clock Rate |
|---|
| Module power supply noise tolerance 10 Hz - 10 MHz (peak-to-peak) |
|---|
| Rx Differential Data Output Load |
|---|
| Operating Distance |
|---|
| Wavelength L0 (Tx) |
|---|
| Wavelength L1 (Tx) |
|---|
| Wavelength L2 (Tx) |
|---|
| Wavelength L3 (Tx) |
|---|
| Side-mode suppression ratio |
|---|
| Total Average Optical Launch Power |
|---|
| Average Launch Power Tx_Off (Each Lane) |
|---|
| Average Optical Launch Power (Each Lane) |
|---|
| Extinction Ratio |
|---|
| Spectral Width |
|---|
| Optical Modulation Amplitude (Each Lane) |
|---|
| Launch Power in OMA minus TDP (Each Lane) |
|---|
| Difference in launch power between any two lanes (OMA) |
|---|
| Transmitter and Dispersion Penalty (Each Lane) |
|---|
| Optical Return Loss Tolerance |
|---|
| Transmitter Eye Mask Definition |
|---|
| RIN20OMA |
|---|
| Wavelength L0 (Rx) |
|---|
| Wavelength L1 (Rx) |
|---|
| Wavelength L2 (Rx) |
|---|
| Wavelength L3 (Rx) |
|---|
| Receiver Sensitivity (OMA) per Lane |
|---|
| Stressed Receiver Sensitivity in OMA (Each Lane) |
|---|
| Stressed Eye J2 Jitter (Each Lane) |
|---|
| Stressed Eye J9 Jitter (Each Lane) |
|---|
| Vertical Eye Closure Penalty |
|---|
| Damage Threshold for Receiver |
|---|
| Average Receive Power (Each Lane) |
|---|
| Receive Power in OMA (Each Lane), Overload |
|---|
| Difference in receive power between any two lanes (OMA) |
|---|
| Receiver 3dB electrical upper cut-off frequency (each lane) |
|---|
| Receiver Reflectance |
|---|
| Receiver Sensitivity Test Condition Note |
|---|
| High-Speed Signal |
|---|
| Low-Speed Signal |
|---|
| Differential Data Input Amplitude (Transmitter/Module Input) |
|---|
| Differential Termination Mismatch (Transmitter/Module Input) |
|---|
| LPMode, Reset and ModSelL Input Voltage Low |
|---|
| LPMode, Reset and ModSelL Input Voltage High |
|---|
| Differential Data Output Amplitude (Receiver/Module Output) |
|---|
| Differential Termination Mismatch (Receiver/Module Output) |
|---|
| Output Rise/Fall Time, 20%~80% |
|---|
| ModPrsL and IntL Output Voltage Low |
|---|
| ModPrsL and IntL Output Voltage High |
|---|
| Electrical Specifications Note |
|---|
| Initialization Time |
|---|
| Reset Init Assert Time |
|---|
| Serial Bus Hardware Ready Time |
|---|
| Monitor Data Ready Time |
|---|
| Reset Assert Time |
|---|
| LPMode/TxDis mode change time |
|---|
| LPMode Assert Time |
|---|
| LPMode De-assert Time |
|---|
| IntL/RxLOSL mode change time |
|---|
| IntL Assert Time |
|---|
| IntL Deassert Time |
|---|
| RxLOSL Assert Time (Optional Fast Mode) |
|---|
| RxLOSL Deassert Time (Optional Fast Mode) |
|---|
| Rx LOS Assert Time |
|---|
| Tx Fault Assert Time |
|---|
| Flag Assert Time |
|---|
| Mask Assert Time |
|---|
| Mask Deassert Time |
|---|
| Application or Rate Select Change Time |
|---|
| Power_over-ride or Power-set Assert Time |
|---|
| Power_over-ride or Power-set De-assert Time |
|---|
| Rx Squelch Assert Time |
|---|
| Rx Squelch Deassert Time |
|---|
| Tx Squelch Assert Time |
|---|
| Tx Squelch Deassert Time |
|---|
| Tx Disable Assert Time |
|---|
| Tx Disable Deassert Time |
|---|
| Tx Disable Assert Time (Optional Fast Mode) |
|---|
| Tx Disable Deassert Time (Optional Fast Mode) |
|---|
| Rx Output Disable Assert Time |
|---|
| Rx Output Disable Deassert Time |
|---|
| Squelch Disable Assert Time |
|---|
| Squelch Disable Deassert Time |
|---|
| Digital Diagnostics - Temperature |
|---|
| Digital Diagnostics - Voltage |
|---|
| Digital Diagnostics - Tx Bias Current (Each Lane) |
|---|
| Digital Diagnostics - Tx Output Power (Each Lane) |
|---|
| Digital Diagnostics - Rx Power (Each Lane) |
|---|
| Pin Count (QSFP28) |
|---|
| Pin Definition Note 1 |
|---|
| Pin Definition Note 2 - Vcc steady state current rating |
|---|
| Recommended Host Board Power Supply Filtering |
|---|
| Order Info - Part No. |
|---|
| Order Info - Application |
|---|
| Order Info - Data Rate |
|---|
| Order Info - Laser Source |
|---|
| Order Info - Fiber Type |
|---|
| Warning - Handling Precautions |
|---|
| Warning - Laser Safety |
|---|
| Warranty |
|---|
| Manufacturer |
|---|
| US Headquarters |
|---|
| Website |
|---|
