Loading the catalog…
SPQ-CE-LR-CDFM (Sourcephotonics)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Max Power W | 3.5 |
|---|---|
| Fiber Type | SMF |
| Host Compatibility | Interoperable with IEEE 802.3ba 100GBASE-LR4 for reaches up to 2km |
| Optical Connector | duplex-LC |
| Product Name | SPQ-CE-LR-CDFM 100GBASE-LR4 QSFP28 Optical Transceiver |
| Laser Class | |
| Management Interface |
| SKU | SPQ-CE-LR-CDFM |
|---|
| Document Number / Revision | |
|---|---|
| Document Date | |
| Standard Compliance | |
| High speed I/O electrical interface | |
| Supply Voltage (Feature) |
| Case Operating Temperature (Feature) |
|---|
| Laser / Receiver Type |
|---|
| Package / Connector |
|---|
| RoHS Compliance |
|---|
| Storage Temperature (TS) Min. |
|---|
| Storage Temperature (TS) Max. |
|---|
| Supply Voltage (VCC) Min. [Absolute Max Ratings] |
|---|
| Supply Voltage (VCC) Max. [Absolute Max Ratings] |
|---|
| Relative Humidity (non-condensing) (RH) Min. |
|---|
| Relative Humidity (non-condensing) (RH) Max. |
|---|
| Data Input Voltage – Differential (|VDIP-VDIN|) Max. |
|---|
| Control Input Voltage (VI) Min. |
|---|
| Control Input Voltage (VI) Max. |
|---|
| Control Output Current (IO) Min. |
|---|
| Control Output Current (IO) Max. |
|---|
| Operating Case Temperature (TOPR) Min. |
|---|
| Operating Case Temperature (TOPR) Max. |
|---|
| Power Supply Voltage (VCC) Min. |
|---|
| Power Supply Voltage (VCC) Typical |
|---|
| Power Supply Voltage (VCC) Max. |
|---|
| Instantaneous peak current at hot plug (ICC_IP) Max. |
|---|
| Sustained peak current at hot plug (ICC_SP) Max. |
|---|
| Maximum Power Dissipation (PD) Max. |
|---|
| Maximum Power Dissipation Low Power Mode (PDLP) Max. |
|---|
| Aggregate Bit Rate (ABR) Typical |
|---|
| Data Rate per Lane (DRL) Typical |
|---|
| Control Input Voltage High (VIH) Min. |
|---|
| Control Input Voltage High (VIH) Max. |
|---|
| Control Input Voltage Low (VIL) Min. |
|---|
| Control Input Voltage Low (VIL) Max. |
|---|
| Two Wire Serial Interface Clock Rate Max. |
|---|
| Power Supply Noise Max. |
|---|
| Rx Differential Data Output Load Typical |
|---|
| Operating Distance Min. |
|---|
| Operating Distance Max. |
|---|
| Tx Wavelength L0 (λC0) Min. |
|---|
| Tx Wavelength L0 (λC0) Typical |
|---|
| Tx Wavelength L0 (λC0) Max. |
|---|
| Tx Wavelength L1 (λC1) Min. |
|---|
| Tx Wavelength L1 (λC1) Typical |
|---|
| Tx Wavelength L1 (λC1) Max. |
|---|
| Tx Wavelength L2 (λC2) Min. |
|---|
| Tx Wavelength L2 (λC2) Typical |
|---|
| Tx Wavelength L2 (λC2) Max. |
|---|
| Tx Wavelength L3 (λC3) Min. |
|---|
| Tx Wavelength L3 (λC3) Typical |
|---|
| Tx Wavelength L3 (λC3) Max. |
|---|
| Side-mode suppression ratio (SMSR) Min. |
|---|
| Total Average Optical Launch Power (POUT) Max. |
|---|
| Average Launch Power Tx_Off (Each Lane) (POUT_OFF) Max. |
|---|
| Average Optical Launch Power (Each Lane) (POUTL) Min. |
|---|
| Average Optical Launch Power (Each Lane) (POUTL) Max. |
|---|
| Extinction Ratio (ER) Min. |
|---|
| Spectral Width (Δλ) Max. |
|---|
| Optical Modulation Amplitude (Each Lane) (OMA) Min. |
|---|
| Optical Modulation Amplitude (Each Lane) (OMA) Max. |
|---|
| Launch Power in OMA minus TDP (Each Lane) (OMA-TDP) Min. |
|---|
| Difference in launch power between any two lanes (OMA) (DT_OMA) Max. |
|---|
| Transmitter and Dispersion Penalty (Each Lane) (TDP) Max. |
|---|
| Optical Return Loss Tolerance (ORLT) Max. |
|---|
| Transmitter Eye Mask Definition |
|---|
| Relative Intensity Noise (RIN) Max. |
|---|
| Rx Wavelength L0 (λC0) Min. |
|---|
| Rx Wavelength L0 (λC0) Typical |
|---|
| Rx Wavelength L0 (λC0) Max. |
|---|
| Rx Wavelength L1 (λC1) Min. |
|---|
| Rx Wavelength L1 (λC1) Typical |
|---|
| Rx Wavelength L1 (λC1) Max. |
|---|
| Rx Wavelength L2 (λC2) Min. |
|---|
| Rx Wavelength L2 (λC2) Typical |
|---|
| Rx Wavelength L2 (λC2) Max. |
|---|
| Rx Wavelength L3 (λC3) Min. |
|---|
| Rx Wavelength L3 (λC3) Typical |
|---|
| Rx Wavelength L3 (λC3) Max. |
|---|
| Receiver Sensitivity (OMA) per Lane Max. |
|---|
| Stressed Receiver Sensitivity in OMA (Each Lane) Max. |
|---|
| Stressed Eye J2 Jitter (Each Lane) Typical |
|---|
| Stressed Eye J9 Jitter (Each Lane) Typical |
|---|
| Vertical Eye Closure Penalty Typical |
|---|
| Damage Threshold for Receiver (Pin, damage) Min. |
|---|
| Average Receive Power (Each Lane) Min. |
|---|
| Average Receive Power (Each Lane) Max. |
|---|
| Receive Power in OMA (Each Lane), Overload (OMA) Max. |
|---|
| Difference in receive power between any two lanes (OMA) (DR_OMA) Max. |
|---|
| Receiver 3dB electrical upper cut-off frequency (each lane) (F_C) Max. |
|---|
| Receiver Reflectance (RXR) Max. |
|---|
| Receiver Test Condition Note |
|---|
| High-Speed Signal Compliance |
|---|
| Low-Speed Signal Compliance |
|---|
| Transmitter Differential Data Input Amplitude (VIN,P-P) Min. |
|---|
| Transmitter Differential Data Input Amplitude (VIN,P-P) Max. |
|---|
| Transmitter Differential Termination Mismatch Max. |
|---|
| LPMode, Reset and ModSelL (VIL) Min. |
|---|
| LPMode, Reset and ModSelL (VIL) Max. |
|---|
| LPMode, Reset and ModSelL (VIH) Min. |
|---|
| LPMode, Reset and ModSelL (VIH) Max. |
|---|
| Receiver Differential Data Output Amplitude (VOUT,P-P) Min. |
|---|
| Receiver Differential Data Output Amplitude (VOUT,P-P) Max. |
|---|
| Receiver Differential Termination Mismatch Max. |
|---|
| Output Rise/Fall Time, 20%~80% (TR) Min. |
|---|
| ModPrsL and IntL (VOL) Min. |
|---|
| ModPrsL and IntL (VOL) Max. |
|---|
| ModPrsL and IntL (VOH) Min. |
|---|
| ModPrsL and IntL (VOH) Max. |
|---|
| Electrical Spec Note 1 |
|---|
| Initialization Time (t_init) Max. |
|---|
| Reset Init Assert Time (t_reset_init) Max. |
|---|
| Serial Bus Hardware Ready Time (t_serial) Max. |
|---|
| Monitor Data Ready Time (t_data) Max. |
|---|
| Reset Assert Time (t_reset) Max. |
|---|
| LPMode Assert Time (ton_LPMode) Max. |
|---|
| LPMode De-assert Time (toff_LPMode) Max. |
|---|
| IntL Assert Time (ton_IntL) Max. |
|---|
| IntL Deassert Time (toff_IntL) Max. |
|---|
| Rx LOS Assert Time (ton_lol) Max. |
|---|
| Tx Fault Assert Time (ton_Txfault) Max. |
|---|
| Flag Assert Time (ton_flag) Max. |
|---|
| Mask Assert Time (ton_mask) Max. |
|---|
| Mask Deassert Time (toff_mask) Max. |
|---|
| Power_over-ride or Power-set Assert Time (ton_Pdown) Max. |
|---|
| Power_over-ride or Power-set De-assert Time (toff_Pdown) Max. |
|---|
| Timing Note 1 |
|---|
| Timing Note 2 |
|---|
| Timing Note 3 |
|---|
| Timing Note 4 |
|---|
| Rx Squelch Assert Time (ton_Rxsq) Max. |
|---|
| Rx Squelch Deassert Time (toff_Rxsq) Max. |
|---|
| Tx Squelch Assert Time (ton_Txsq) Max. |
|---|
| Tx Squelch Deassert Time (toff_Txsq) Max. |
|---|
| Tx Disable Assert Time (ton_txdis) Max. |
|---|
| Tx Disable Deassert Time (toff_txdis) Max. |
|---|
| Rx Output Disable Assert Time (ton_rxdis) Max. |
|---|
| Rx Output Disable Deassert Time (toff_rxdis) Max. |
|---|
| Squelch Disable Assert Time (ton_sqdis) Max. |
|---|
| Squelch Disable Deassert Time (toff_sqdis) Max. |
|---|
| Squelch & Disable Timing Note 1 |
|---|
| Digital Diagnostics - Temperature Range |
|---|
| Digital Diagnostics - Temperature Accuracy |
|---|
| Digital Diagnostics - Temperature Calibration |
|---|
| Digital Diagnostics - Voltage Range |
|---|
| Digital Diagnostics - Voltage Accuracy |
|---|
| Digital Diagnostics - Voltage Calibration |
|---|
| Digital Diagnostics - Tx Bias Current (Each Lane) Range |
|---|
| Digital Diagnostics - Tx Bias Current (Each Lane) Accuracy |
|---|
| Digital Diagnostics - Tx Bias Current (Each Lane) Calibration |
|---|
| Digital Diagnostics - Tx Output Power (Each Lane) Range |
|---|
| Digital Diagnostics - Tx Output Power (Each Lane) Accuracy |
|---|
| Digital Diagnostics - Tx Output Power (Each Lane) Calibration |
|---|
| Digital Diagnostics - Rx Power (Each Lane) Range |
|---|
| Digital Diagnostics - Rx Power (Each Lane) Accuracy |
|---|
| Digital Diagnostics - Rx Power (Each Lane) Calibration |
|---|
| Pin Count |
|---|
| Power Supply Pins (Vcc Rx, Vcc Tx, Vcc1) |
|---|
| Recommended Host Board Power Supply Filtering |
|---|
| Boot-up Note |
|---|
| Order Information - Part No. |
|---|
| Order Information - Application |
|---|
| Order Information - Data Rate |
|---|
| Order Information - Laser Source |
|---|
| Order Information - Fiber Type |
|---|
| ESD Handling Precautions |
|---|
| Laser Safety |
|---|
| Warranty |
|---|
| Manufacturer |
|---|
| US Headquarters |
|---|
| Website |
|---|
