Loading the catalog…
SPQ-CE-LR-CDFH (Sourcephotonics)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Form factor | QSFP28 |
|---|---|
| SKU | SPQ-CE-LR-CDFH |
| Fiber Type | SMF |
|---|---|
| Data Rate Gbps | 100 |
| Interconnect Type | optical_transceiver |
| Media Reach Class | LR1 |
| Product Name | 100G-LR1 10km QSFP28 Transceiver |
| Feature | |
| Pin 1 | |
| Pin 10 | |
| Pin 11 | |
| Pin 12 | |
| Pin 13 | |
| Pin 14 | |
| Pin 15 | |
| Pin 16 |
| Pin 17 |
|---|
| Pin 18 |
|---|
| Pin 19 |
|---|
| Pin 2 |
|---|
| Pin 20 |
|---|
| Pin 3 |
|---|
| Pin 4 |
|---|
| Pin 5 |
|---|
| Pin 6 |
|---|
| Pin 7 |
|---|
| Pin 8 |
|---|
| Pin 9 |
|---|
| Product Description |
|---|
| Storage Temperature |
|---|
| Supply Voltage |
|---|
| Document Number | |
|---|---|
| Document Date | |
| Relative Humidity (non-condensing) | |
| Data Input Voltage – Differential | |
| Control Input Voltage | |
| Control Output Current | |
| Operating Case Temperature | |
| Power Supply Voltage | |
| Instantaneous peak current at hot plug | |
| Sustained peak current at hot plug | |
| Maximum Power Dissipation | |
| Maximum Power Dissipation, Low Power Mode | |
| Signalling Rate | |
| Control Input Voltage High | |
| Control Input Voltage Low | |
| Two Wire Serial Interface Clock Rate | |
| Power Supply Noise | |
| Rx Differential Data Output Load | |
| Operating Distance | |
| Wavelength | |
| Side mode suppression ratio | |
| Average Optical Launch Power | |
| Average launch power of OFF transmitter | |
| Extinction Ratio | |
| Outer Optical Modulation Amplitude (OMAouter) | |
| Outer Optical Modulation Amplitude (OMAouter) for TDECQ <1.4 dB for 1.4 dB ≤TDECQ ≤3.4 dB | |
| Transmitter and dispersion eye closure | |
| Transmitter eye closure for PAM4 (TECQ) | |
| | TDECQ - TECQ | | |
| Over/under-shoot | |
| Transmitter power excursion | |
| RIN15.6OMA | |
| Optical return loss tolerance | |
| Transmitter transition time | |
| Transmitter reflectance | |
| Note 1 (Transmitter) | |
| Damage Threshold | |
| Average receive power | |
| Receive power (OMAouter) | |
| Receiver reflectance | |
| Receiver sensitivity (OMAouter) for TECQ < 1.4 dB for 1.4 dB≤ TECQ ≤3.4 dB | |
| Stressed receiver sensitivity | |
| Stressed Receiver Sensitivity Test Conditions | |
| Stressed eye closure for PAM4 (SECQ) | |
| Note 1 (Receiver) | |
| Note 2 (Receiver) | |
| AC common-mode output Voltage (RMS) | |
| Differential output Voltage | |
| Eye width | |
| Eye height differential | |
| Vertical eye closure | |
| Differential Termination Mismatch | |
| Transition Time (min, 20% to 80%) | |
| DC common mode Voltage | |
| Differential pk-pk input Voltage tolerance | |
| Differential termination mismatch | |
| Single-ended voltage tolerance range | |
| Module output SCL and SDA - VOL | |
| Module output SCL and SDA - VOH | |
| Module Input SCL and SDA - VIL | |
| Module Input SCL and SDA - VIH | |
| LPMode/TxDis, ResetL and ModSelL - VIL | |
| LPMode/TxDis, ResetL and ModSelL - VIH | |
| ModPrsL and IntL/RxLOSL - VOL | |
| ModPrsL and IntL/RxLOSL - VOH | |
| Recommended Host Board Power Supply Filtering | |
| Pin 21 | |
| Pin 22 | |
| Pin 23 | |
| Pin 24 | |
| Pin 25 | |
| Pin 26 | |
| Pin 27 | |
| Pin 28 | |
| Pin 29 | |
| Pin 30 | |
| Pin 31 | |
| Pin 32 | |
| Pin 33 | |
| Pin 34 | |
| Pin 35 | |
| Pin 36 | |
| Pin 37 | |
| Pin 38 | |
| Pin Note 1 | |
| Pin Note 2 | |
| Digital Diagnostics - Temperature | |
| Digital Diagnostics - Voltage | |
| Digital Diagnostics - Tx Bias Current | |
| Digital Diagnostics - Tx Output Power | |
| Digital Diagnostics - Rx Receive Power | |
| Ordering - Part No. | |
| Ordering - Application | |
| Ordering - Data Rate | |
| Ordering - Laser Source | |
| Ordering - Fiber Type | |
| Mechanical - Overall length | |
| Mechanical - Overall length (incl. connector) | |
| Mechanical - Width | |
| Handling Precautions | |
| Laser Safety | |
| Warranty | |
| Copyright | |
| Manufacturer US Headquarters | |
| Manufacturer Website |
