Loading the catalog…
SPQ-4E-FR-CDFB (Sourcephotonics)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Data Rate Gbps | 400 |
|---|---|
| Interconnect Type | optical_transceiver |
| Fiber Type | SMF |
| Media Reach Class | FR4 |
| Product Name | 400G-FR4 QSFP-DD Transceiver |
| Feature | |
| Storage Temperature | |
| Supply Voltage |
| Form factor | QSFP-DD |
|---|---|
| SKU | SPQ-4E-FR-CDFB |
| Document Number | |
|---|---|
| Document Date | |
| Feature - Compliance | |
| Feature - Maximum power consumption |
| Feature - Case operating temperature |
|---|
| Feature - Laser Class |
|---|
| Relative Humidity (non-condensing) |
|---|
| Data Input Voltage Differential |
|---|
| Control Input Voltage |
|---|
| Control Output Current |
|---|
| Operating Case Temperature |
|---|
| Power Supply Voltage |
|---|
| Instantaneous peak current at hot plug |
|---|
| Sustained peak current at hot plug |
|---|
| Maximum Power Dissipation |
|---|
| Maximum Power Dissipation, Low Power Mode |
|---|
| Signalling Rate per Lane |
|---|
| Two Wire Serial Interface Clock Rate |
|---|
| Module power supply noise tolerance 10 Hz - 10 MHz (ptp) |
|---|
| Rx Differential Data Output Load |
|---|
| Operating Distance |
|---|
| Wavelength L0 |
|---|
| Wavelength L1 |
|---|
| Wavelength L2 |
|---|
| Wavelength L3 |
|---|
| Side Mode Suppression Ratio |
|---|
| Average Launch Power, each lane |
|---|
| Outer Optical Modulation Amplitude (OMAouter), each lane |
|---|
| Outer Optical Modulation Amplitude (OMAouter) each lane: for TDECQ <1.4dB |
|---|
| Outer Optical Modulation Amplitude (OMAouter) each lane: for 1.4≤TDECQ≤3.4dB |
|---|
| Difference in launch power between any two lanes (OMAouter) |
|---|
| Transmitter and Dispersion Eye Closure for PAM4 (TDECQ), each lane |
|---|
| Transmitter eye closure for PAM4 (TECQ) |
|---|
| | TDECQ - TECQ | |
|---|
| Over/under-shoot |
|---|
| Transmitter power excursion |
|---|
| Average Launch Power of OFF Transmitter, each lane |
|---|
| Extinction Ratio, each lane |
|---|
| Transmitter transition time |
|---|
| RIN17.1OMA |
|---|
| Optical Return Loss Tolerance |
|---|
| Transmitter Reflectance |
|---|
| Note 1 (Transmitter) |
|---|
| Damage Threshold, each lane |
|---|
| Average Receive Power, each lane |
|---|
| Receive Power (OMAouter), each lane |
|---|
| Difference in receive power between any two lanes (OMAouter) |
|---|
| Receiver Reflectance |
|---|
| Receiver Sensitivity (OMAouter), each lane: for TECQ <1.4dB |
|---|
| Receiver Sensitivity (OMAouter), each lane: for 1.4≤TECQ≤3.4dB |
|---|
| Stressed Receiver Sensitivity (OMAouter), each lane |
|---|
| Stressed eye closure for PAM4 (SECQ) |
|---|
| OMAouter of each aggressor lane |
|---|
| Note 1 (Receiver) |
|---|
| AC common-mode output Voltage (RMS) |
|---|
| Differential output Voltage |
|---|
| Near-end Eye height, differential |
|---|
| Far-end Eye height, differential |
|---|
| Far end pre-cursor ISI ratio |
|---|
| Differential Termination Mismatch |
|---|
| Transition Time (min, 20% to 80%) |
|---|
| DC common mode Voltage |
|---|
| Differential pk-pk input Voltage tolerance |
|---|
| Differential termination mismatch |
|---|
| Single-ended voltage tolerance range |
|---|
| Module output SCL and SDA |
|---|
| Module Input SCL and SDA |
|---|
| Module Input SCL and SDA (VIL) |
|---|
| Module Input SCL and SDA (VIH) |
|---|
| LPMode, ResetL, ModSelL and ePPS (VIL) |
|---|
| LPMode, ResetL, ModSelL and ePPS (VIH) |
|---|
| IntL (VOL) |
|---|
| IntL (VOH) |
|---|
| MgmtInit Duration |
|---|
| ResetL Assert Time |
|---|
| IntL Assert Time |
|---|
| IntL Deassert Time |
|---|
| Rx LOS Assert Time (optional fast mode) |
|---|
| Tx Fault Assert Time |
|---|
| Flag Assert Time |
|---|
| Mask Assert Time |
|---|
| Mask Deassert Time |
|---|
| Rx Squelch Assert Time |
|---|
| Tx Squelch Assert Time |
|---|
| Tx Squelch Deassert Time |
|---|
| Tx Disable Assert Time (optional fast mode) |
|---|
| Tx Disable Deassert Time (optional fast mode) |
|---|
| Rx Output Disable Assert Time |
|---|
| Rx Output Disable Deassert Time |
|---|
| Squelch Disable Assert Time |
|---|
| Squelch Disable Deassert Time |
|---|
| Digital Diagnostics - Temperature Range |
|---|
| Digital Diagnostics - Temperature Accuracy |
|---|
| Digital Diagnostics - Temperature Calibration |
|---|
| Digital Diagnostics - Voltage Range |
|---|
| Digital Diagnostics - Voltage Accuracy |
|---|
| Digital Diagnostics - Voltage Calibration |
|---|
| Digital Diagnostics - Tx Bias Current (Each Lane) Range |
|---|
| Digital Diagnostics - Tx Bias Current (Each Lane) Accuracy |
|---|
| Digital Diagnostics - Tx Bias Current (Each Lane) Calibration |
|---|
| Digital Diagnostics - Tx Output Power (Each Lane) Range |
|---|
| Digital Diagnostics - Tx Output Power (Each Lane) Accuracy |
|---|
| Digital Diagnostics - Tx Output Power (Each Lane) Calibration |
|---|
| Digital Diagnostics - Rx Receive Power (Each Lane) Range |
|---|
| Digital Diagnostics - Rx Receive Power (Each Lane) Accuracy |
|---|
| Digital Diagnostics - Rx Receive Power (Each Lane) Calibration |
|---|
| Mechanical Dimension - Length |
|---|
| Mechanical Dimension |
|---|
| Mechanical Dimension - Width |
|---|
| Mechanical Dimension - Length (with pull tab) |
|---|
| Mechanical Dimension - Height |
|---|
| Ordering - Part No. |
|---|
| Ordering - Application |
|---|
| Ordering - Data Rate |
|---|
| Ordering - Laser Source |
|---|
| Ordering - Fiber Type |
|---|
| Manufacturer |
|---|
| Warranty |
|---|
| Handling Precautions |
|---|
| Laser Safety |
|---|
