Loading the catalog…
PGS180 (Corning)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Jacket Material | polyethylene (PE) |
|---|---|
| Media Type | fiber |
| Fiber Mode | singlemode |
| Packaging | |
| Product Name |
| SKU | PGS180 |
|---|
| Document title | |
|---|---|
| Specification number | |
| Date | |
| Revision | |
| MasterFormat | |
| MasterFormat division | |
| Applicable standards (design and tested to) |
| Fiber type reference document |
|---|
| Fibers per ribbon |
|---|
| Ribbon dimension measurement standard |
|---|
| Fiber color coding standard |
|---|
| Fiber coloring ink |
|---|
| Ribbon matrix material removal |
|---|
| Maximum ribbons in protective sleeve |
|---|
| Water blocking |
|---|
| Strength elements (general) |
|---|
| Strength members |
|---|
| Fast access features |
|---|
| Minimum nominal jacket thickness |
|---|
| Minimum nominal jacket thickness over strength elements |
|---|
| Armor type |
|---|
| Figure 1 callout |
|---|
| Figure 2 callout |
|---|
| Jacket material type (ICEA S-87-640 2023) |
|---|
| Dielectric cable design metal content |
|---|
| Length marking tolerance |
|---|
| Preferred remarking color |
|---|
| Secondary remarking color |
|---|
| Maximum pulling tension (installation, short term) |
|---|
| Maximum pulling tension (long term installed) |
|---|
| Minimum bend radius (installation and operation) |
|---|
| Shipping, storage, and operating temperature range |
|---|
| Installation temperature range |
|---|
| Maximum cabled attenuation |
|---|
| Attenuation wavelengths |
|---|
| Jacket print example |
|---|
| SOC code format |
|---|
| Sequential length marking interval |
|---|
| Temperature cycling test standard |
|---|
| Temperature cycling extreme test temperatures |
|---|
| Temperature cycling max attenuation change (single-mode, 1550 nm) |
|---|
| Temperature cycling max attenuation change (multimode, 1300 nm) |
|---|
| Fluid penetration test standard |
|---|
| Fluid penetration test conditions |
|---|
| Compressive loading test standard |
|---|
| Compressive load (minimum) |
|---|
| Compressive load application rate |
|---|
| Compressive load hold time (220 N/cm) |
|---|
| Compressive load reduced value |
|---|
| Compressive load hold time (110 N/cm) |
|---|
| Compressive loading max attenuation change (single-mode, 1550 nm) |
|---|
| Compressive loading max attenuation change (multimode, 1300 nm) |
|---|
| Cyclic flexing test standard |
|---|
| Cyclic flexing cycles |
|---|
| Cyclic flexing sheave diameter |
|---|
| Cyclic flexing max attenuation change (single-mode, 1550 nm) |
|---|
| Cyclic flexing max attenuation change (multimode, 1300 nm) |
|---|
| Repeated impact test standard |
|---|
| Repeated impact - number of impacts |
|---|
| Repeated impact energy (minimum) |
|---|
| Repeated impact max attenuation change (single-mode, 1550 nm) |
|---|
| Repeated impact max attenuation change (multimode, 1300 nm) |
|---|
| Tensile loading and bending test standard |
|---|
| Tensile test mandrel and sheave diameter (maximum) |
|---|
| Rated tensile load |
|---|
| Residual load |
|---|
| Residual load as percent of rated installation load |
|---|
| Axial fiber strain at rated installation load (60 min conditioning) |
|---|
| Axial fiber strain at residual load (10 min conditioning) |
|---|
| Tensile test max attenuation change (single-mode, 1550 nm) |
|---|
| Tensile test max attenuation change (multimode, 1300 nm) |
|---|
| Twist test standard |
|---|
| Twist test sample length and cycles |
|---|
| Twist test max attenuation change (single-mode, 1550 nm) |
|---|
| Twist test max attenuation change (multimode, 1300 nm) |
|---|
| Low/high temperature bend test standard |
|---|
| Temperature bend test conditions |
|---|
| Temperature bend test max attenuation change (single-mode, 1550 nm) |
|---|
| Temperature bend test max attenuation change (multimode, 1300 nm) |
|---|
| Ribbon twist test standard |
|---|
| Ribbon twist test conditions |
|---|
| Ribbon residual twist test standard |
|---|
| Ribbon flatness change (residual twist) |
|---|
| Ribbon residual twist sample aging |
|---|
| Ribbon separability test standard |
|---|
| Ribbon separability requirement |
|---|
| Cable ends |
|---|
| 100% attenuation testing length threshold |
|---|
| Manufacturer registration |
|---|
| Revision history - Revision # |
|---|
| Revision history - Date |
|---|
| Revision history - Reason for Change |
|---|
