Loading the catalog…
PGS178 (Corning)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Jacket Material | Polyethylene (PE) |
|---|---|
| Media Type | fiber |
| Armored | |
| Packaging | |
| Product Name |
| SKU | PGS178 |
|---|
| Specification number | |
|---|---|
| Generic specification title | |
| Date | |
| Revision | |
| MasterFormat | |
| MasterFormat division |
| Applicable standards (design and test) |
|---|
| Single-mode fiber spec reference |
|---|
| Multimode fiber types referenced |
|---|
| Multimode fiber spec reference |
|---|
| Fibers per ribbon |
|---|
| Ribbon dimension measurement method |
|---|
| Fiber color coding standard |
|---|
| Fiber coloring ink |
|---|
| Ribbon identification |
|---|
| Ribbon matrix material removal |
|---|
| Subunit count |
|---|
| Ribbons per subunit |
|---|
| Ribbon adhesion to subunit |
|---|
| Ribbon ID within subunit |
|---|
| Subunit color coding standard |
|---|
| Subunit jacket |
|---|
| Water-blocking yarns per subunit (ripcords) |
|---|
| Subunit stranding process |
|---|
| Core water blocking |
|---|
| Water blocking material properties |
|---|
| Strength elements |
|---|
| Strength elements (non-armored) |
|---|
| Strength elements (armored) |
|---|
| Nominal jacket thickness |
|---|
| Minimum nominal jacket thickness over strength elements |
|---|
| UV protection |
|---|
| Nominal jacket thickness over strength elements |
|---|
| Jacket material type (ICEA S-87-640) |
|---|
| Jacket/sheath condition |
|---|
| Dielectric design metal content |
|---|
| Jacket markings |
|---|
| Length marking tolerance |
|---|
| Remarking colors |
|---|
| Maximum pulling tension (short term, installation) |
|---|
| Maximum pulling tension (long term, installed) |
|---|
| Minimum bend radius |
|---|
| Shipping/storage/operating temperature range |
|---|
| Installation temperature range |
|---|
| Maximum cabled attenuation |
|---|
| Maximum cabled attenuation (up to 5% of fibers) |
|---|
| Attenuation operation wavelengths |
|---|
| SOC code format |
|---|
| Jacket print example |
|---|
| Sequential length marking interval |
|---|
| Temperature cycling test method |
|---|
| Temperature cycling extreme temperatures |
|---|
| Temperature cycling max attenuation change (single-mode) |
|---|
| Temperature cycling max attenuation change (multimode) |
|---|
| Fluid penetration test method |
|---|
| Fluid penetration test conditions |
|---|
| Compressive loading test method |
|---|
| Minimum compressive load |
|---|
| Compressive load application rate |
|---|
| Compressive load (initial) hold time |
|---|
| Compressive load (reduced) |
|---|
| Compressive load (reduced) hold time |
|---|
| Compressive test max attenuation change (single-mode) |
|---|
| Compressive test max attenuation change (multimode) |
|---|
| Cyclic flexing test method |
|---|
| Cyclic flexing cycles |
|---|
| Cyclic flexing sheave diameter |
|---|
| Cyclic flexing max attenuation change (single-mode) |
|---|
| Cyclic flexing max attenuation change (multimode) |
|---|
| Repeated impact test method |
|---|
| Impact count and locations |
|---|
| Impact energy |
|---|
| Impact test max attenuation change (single-mode) |
|---|
| Impact test max attenuation change (multimode) |
|---|
| Tensile loading and bending test method |
|---|
| Tensile test mandrel and sheave diameter |
|---|
| Rated tensile load |
|---|
| Residual load |
|---|
| Residual load (% of rated installation load) |
|---|
| Axial fiber strain at rated installation load |
|---|
| Axial fiber strain at residual load |
|---|
| Tensile test max attenuation change (single-mode) |
|---|
| Tensile test max attenuation change (multimode) |
|---|
| Twist test method |
|---|
| Twist test sample length and cycles |
|---|
| Twist test max attenuation change (single-mode) |
|---|
| Twist test max attenuation change (multimode) |
|---|
| Low/high temperature bend test method |
|---|
| Low/high temp bend test conditions |
|---|
| Low/high temp bend test jacket condition |
|---|
| Low/high temp bend test max attenuation change (single-mode) |
|---|
| Low/high temp bend test max attenuation change (multimode) |
|---|
| Ribbon twist test method |
|---|
| Ribbon twist test conditions |
|---|
| Ribbon residual twist test method |
|---|
| Ribbon flatness change |
|---|
| Ribbon residual twist test aging |
|---|
| Ribbon separability test method |
|---|
| Ribbon separability conditions |
|---|
| Cable end sealing |
|---|
| Quality assurance - attenuation testing |
|---|
| Manufacturer registration |
|---|
| Revision history - Revision 1 |
|---|
| Revision history - Revision 2 |
|---|
