Loading the catalog…
IBAR HXC (Anord Mardix)
Blurred values are subscriber-only. Sign in to start a free trial — 2 full pages a day — or subscribe for unlimited access.
| Voltage V | 1000 |
|---|---|
| Frequency Hz | 50/60 |
| Rated Insulation Voltage V | 1000 |
| Ip Rating | 55 |
| System Config | Sandwich |
| Conductor Material | copper |
| Product Type | busway_run |
| Allowable Peak Current For Single Phase Fault Ipk | |
| Allowable Peak Current For Three Phase Fault Ipk | |
| Housing Material | |
| Product Name |
| SKU | IBAR HXC |
|---|
| Conductor profile | |
|---|---|
| Conductor surface treatment |
| Conductor Insulation |
|---|
| Casing overall dimensions W x H |
|---|
| Conductor dimensions W x D |
|---|
| Conductor CSA |
|---|
| Weight (3 conductors) |
|---|
| Weight (4 conductors) |
|---|
| Weight (5 conductors) |
|---|
| Weight (6 conductors) |
|---|
| Rated short-time current for three-phase fault (1s) Icw rms |
|---|
| Rated short-time current for single-phase fault (1s) Icw rms |
|---|
| Rated short-time withstand current for protective fault circuit (case) (1s) Icw rms |
|---|
| Allowable peak current for protective circuit fault (case) Ipk |
|---|
| Mean resistance at 20oC ambient |
|---|
| Mean resistance at rated current & 35°C ambient |
|---|
| Mean reactance at rated current |
|---|
| Mean impedance at rated current & 35°C ambient |
|---|
| Line to Line Volt Drop - Load Power Factor 1.0 |
|---|
| Line to Line Volt Drop - Load Power Factor 0.9 |
|---|
| Line to Line Volt Drop - Load Power Factor 0.8 |
|---|
| Line to Line Volt Drop - Load Power Factor 0.7 |
|---|
| Volt Drop footnote |
|---|
| Busbar rating range |
|---|
| Number of conductive bars |
|---|
| Conductor insulation |
|---|
| Configurations available |
|---|
| Manufacturing standard |
|---|
| Standard straight length |
|---|
| Tap-off points per straight length |
|---|
| Single tap-off rating (copper conductor) |
|---|
| Conductor material detail |
|---|
| Trunking case |
|---|
| Standard straight lengths |
|---|
| Straight Min. X length |
|---|
| Straight Max. X length |
|---|
| Straight W (width) |
|---|
| Part number example |
|---|
| IBAR Range Code |
|---|
| Conductor Type Code |
|---|
| Rating Code (A) |
|---|
| Part Type Code |
|---|
| Part Variant Code |
|---|
| Flatwise Elbow Standard X |
|---|
| Flatwise Elbow Standard Y |
|---|
| Flatwise Elbow Min X & Y |
|---|
| Flatwise Elbow Max X & Y |
|---|
| Flatwise Elbow Stack |
|---|
| Edgewise Elbow Standard X & Y |
|---|
| Edgewise Elbow Min. X & Y |
|---|
| Edgewise Elbow Max. X & Y |
|---|
| Flatwise Offset Standard X |
|---|
| Flatwise Offset Min X & Y |
|---|
| Flatwise Offset Max X & Y |
|---|
| Flatwise Offset Min Z |
|---|
| Flatwise Offset Max Z |
|---|
| Edgewise Offset Standard X & Y |
|---|
| Edgewise Offset Min. X & Y |
|---|
| Edgewise Offset Max. X & Y |
|---|
| Edgewise Offset Min. Z |
|---|
| Edgewise Offset Max. Z |
|---|
| Flatwise Panel Flange Minimum X |
|---|
| Flatwise Panel Flange Minimum Y |
|---|
| Flatwise Panel Flange Maximum X |
|---|
| Flatwise Panel Flange Maximum Y |
|---|
| Straight Panel Flange Standard / Min. X |
|---|
| Straight Panel Flange Max. X |
|---|
| Flatwise Tee Standard X |
|---|
| Flatwise Tee Min X & Y |
|---|
| Flatwise Tee Max X & Y |
|---|
| Flatwise Tee Min Z |
|---|
| Flatwise Tee Max Z |
|---|
| Edgewise Panel Flange Min. X |
|---|
| Edgewise Panel Flange Max. X |
|---|
| Edgewise Panel Flange Min. Y |
|---|
| Edgewise Panel Flange Max. Y |
|---|
| Connection Box (End/Centre Feed) Single Stack Busbar A |
|---|
| Connection Box (End/Centre Feed) Single Stack Busbar B |
|---|
| Connection Box (End/Centre Feed) Single Stack Busbar C |
|---|
| Connection Box (End/Centre Feed) Double Stack Busbar A |
|---|
| Connection Box (End/Centre Feed) Double Stack Busbar B |
|---|
| Connection Box (End/Centre Feed) Double Stack Busbar C |
|---|
| Fixings compatibility |
|---|
| Fire Barrier rating |
|---|
| Distribution Lengths tap-off points |
|---|
| Feeder Lengths standard lengths |
|---|
| Range |
|---|
| Manufacturer |
|---|
| Manufacturer entity |
|---|
| Manufacturer address |
|---|
| Busbar ratings range |
|---|
| Conductor construction |
|---|
| Country of manufacture |
|---|
| Single tap-off location rating (copper) |
|---|
| Conductor material (detail) |
|---|
| Conductor material standard |
|---|
| Volt drop test conditions |
|---|
| Part numbering example |
|---|
| Part Type Codes |
|---|
| Straight standard lengths |
|---|
| Straight Min. X |
|---|
| Straight Max. X |
|---|
| Straight W |
|---|
| Edgewise Elbows Standard X & Y |
|---|
| Edgewise Elbows Min. X & Y |
|---|
| Edgewise Elbows Max. X & Y |
|---|
| Flatwise Elbow X (Standard) |
|---|
| Flatwise Elbow Y (Standard) |
|---|
| Edgewise Offsets Standard X & Y |
|---|
| Edgewise Offsets Min. X & Y |
|---|
| Edgewise Offsets Max. X & Y |
|---|
| Edgewise Offsets Min. Z |
|---|
| Edgewise Offsets Max. Z |
|---|
| Flatwise Offset Stack |
|---|
| Straight Panel Flanges Standard / Min. X |
|---|
| Straight Panel Flanges Max. X |
|---|
| Edgewise Panel Flanges Min. X |
|---|
| Edgewise Panel Flanges Max. X |
|---|
| Edgewise Panel Flanges Min. Y |
|---|
| Edgewise Panel Flanges Max. Y |
|---|
| Flatwise Tee Stack |
|---|
| Connection Box - Single Stack Busbar A |
|---|
| Connection Box - Single Stack Busbar B |
|---|
| Connection Box - Single Stack Busbar C |
|---|
| Connection Box - Double Stack Busbar A |
|---|
| Connection Box - Double Stack Busbar B |
|---|
| Connection Box - Double Stack Busbar C |
|---|
| Mounting hardware compatibility |
|---|
| Tap-off typical dimensions 100-250A - A |
|---|
| Tap-off typical dimensions 100-250A - B |
|---|
| Tap-off typical dimensions 100-250A - C |
|---|
| Tap-off typical weight 100-250A |
|---|
| Tap-off typical dimensions 400-630A - A |
|---|
| Tap-off typical dimensions 400-630A - B |
|---|
| Tap-off typical dimensions 400-630A - C |
|---|
| Tap-off typical weight 400-630A |
|---|
| Tap-off IP rating (covers in place) |
|---|
| Tap-off shutter rating |
|---|
| Tap-off door-open access rating |
|---|
| Tap-off gland plate options |
|---|
| Tap-off polymer material |
|---|
| Tap-off standard colour finish |
|---|
| Tap-off protective device manufacturers |
|---|
| Metering manufacturers |
|---|
| Comms options |
|---|
| Ethernet gateway |
|---|
| Metering option - Schneider Electric PM5111 |
|---|
| Metering option - Schneider Electric iEM3255 |
|---|
| Distribution length tap-off points |
|---|
| Feeder length standard lengths |
|---|
| Fire barrier rating |
|---|
